This error may occur if you’ve recently created a new vehicle type in Navistream and are now using that vehicle type without assigning an inspection template to it.


To fix this, you’ll need to add your vehicle type to a custom inspection that you’ve created.


To create a new inspection template, follow the directions below:

  • Click on Management & Settings and select “Templates” under the “Inspections” heading.


  • Click on “Create a new Inspection Template”.



  • Fill out all fields for your template including Name, Description, Active, Odometer Reading, Applies to, and Vehicle Type

    • Select the vehicle types you’d like this inspection to apply to. This will likely be the new vehicle type you’ve created and are now having an issue with.


  • Add inspection Tasks to your template by clicking “Add Category” at the bottom.


  • Give the task a name and assign it a Tasks heading for it to appear under


  • Click on “Create Inspection Template” when completed.


OR


Copy existing inspection template for use on a different vehicle type.

This is handy for creating a custom vehicle that will follow standard Schedule 1 Inspection protocols as the default Schedule 1 inspection in Navistream can’t be modified in any way.


  • Click on Management & Settings and select “Templates” under the “Inspections” heading.


  • Scroll through the list of templates to find the template you’d like to base the new template on.


  • Click on the name of the template to open it up.


  • Click on “Copy Template” in the top right.



  • Rename and adjust any fields in this template, and select your vehicle from step 1 in the “Applies to” box.


  • Click on “Create Inspection Template” when completed.